Radio Design Labs RM-MP12A Audio Monitor Panel12 Line or Speaker Input
800.466.0449
Radio Design Labs RM-MP12A Audio Monitor Panel12 Line or Speaker Input
Inputs (12): |
+4 dBu, 25 V, 70.7 V, 100 V (set by rear-panel switches) |
Input Level: |
-11 dBu to +9 dBu (+4 dBu input) 25 V, 70.7 V, 100 V (calibrated with gain trim set fully counter-clockwise) |
Headroom: |
> 18 dB (above calibrated input level) |
Gain: |
0 dB to 20 dB (Adjustable for speaker-level input, 25-turn trim potentiometer) |
Frequency Response: |
10 Hz to 20 kHz (+/-0.25 dB) |
THD+N: |
< 0.010% (20 Hz to 20 kHz) |
Intermodulation Distortion: |
< 0.025% (20 Hz to 20 kHz) |
Channel to Channel Crosstalk: |
< -80dB (10Hz to 20 kHz) |
Residual Noise: |
< -80 dB (Channel ON; referred to +4 dBu) |
OFF Attenuation: |
> 80 dB (10 Hz to 20 kHz) |
Indicators per Channel (2): |
Red channel active LED above button; Variable intensity audio level LED for each input (minimum intensity at -15 dB, maximum intensity at 0 dB) |
CMRR: |
> 75 dB (50 to 120 Hz) |
Outputs (4): |
150 Ohms, +4 dBu fixed level (balanced or unbalanced via plug-in terminal block) |
Power Requirement: |
GROUND-REFERENCED, 24 to 33 Vdc @ 700 mA |
Dimensions: |
|
Height: |
1.75", 4.40 cm |
Depth: |
5.35". 13.60 cm |
Ambient Operating Environment: |
00 C to 550 C |
Brand | Radio Design Labs | ||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Manufacturer | Radio Design Labs | ||||||||||||||||||||||||||||||||||||
SKU | RM-MP12A | ||||||||||||||||||||||||||||||||||||
UPC | 813721016317 | ||||||||||||||||||||||||||||||||||||
Part No | RM-MP12A | ||||||||||||||||||||||||||||||||||||
Weight (lb.) | 5 | ||||||||||||||||||||||||||||||||||||
Product Datasheet | rm-mp12a.pdf | ||||||||||||||||||||||||||||||||||||
Unit | EACH | ||||||||||||||||||||||||||||||||||||
Carton Quantity | 1 | ||||||||||||||||||||||||||||||||||||
Short Description | Each RM-MP12 input may be individually calibrated for unbalanced consumer, balanced professional, 8 Ohm speaker line or constant voltage speaker lines. There is a variable intensity LED on the front panel to show audio presence for each input. If the RM-MP12 is set to the interlocking operating mode, front-panel pushbuttons select one of the twelve inputs to feed the calibrated meter, front-panel speaker (or external speaker if connected) and headphone jack. In the mixing mode, the buttons allow the use to mix multiple sources. The front-panel volume knob controls the audio level of the front-panel headphone jack, front-panel speaker, external speaker output and variable line level (+4 dBu) rear-panel output. A separate fixed line-level output is provided. |
||||||||||||||||||||||||||||||||||||
Description | Radio Design Labs RM-MP12A Audio Monitor Panel12 Line or Speaker Input
|