Radio Design Labs FP-PA20 20W Mono Audio Amplifier - 8 Ω

Part No:
FP-PA20
Unit of Measure: EACH
Ships from: Arizona
$208.19
List Price: $277.59
  
You save 25%
22 In stock
Is This The Right Item For Me?
800.466.0449
Input:Line level (+4 dBu bal; -10 dBV unbal)
Input Impedance: 20 kΩ balanced bridging; 10 kΩ unbal
Input / Output Connector: Detachable terminal block
Gain Adjustment: Single turn audio taper
Minimum Input Levels:
Balanced: -26 dBu (to cross compressor threshold)
Unbalanced: -28 dBV (to cross compressor threshold)
Maximum Input Levels:
Balanced: +23 dBu
Unbalanced: +15 dBV
Frequency Response: 35 Hz to 50 kHz (+/- 1.5 dB)*
THD+N:
*measured at compressor threshold level equaling 4 W RMS output power
< 0.1% (@ 1 kHz)*
< 0.5% (35 Hz to 20 kHz)*
Noise:< -80 dB (below 20 W RMS)
Compressor:Threshold 6 dB below rated output, automatic adjusting attack and release
CMRR:> 55 dB (50 Hz to 120 Hz)
Output Power:20 W RMS into 8 Ω
Ambient Operating Environment:0?? C to 30?? C Max; 20?? C Recommended
Indicators (2):
Red LED:PEAK LED indicates compressor activity
Green LED:Power ON
Power Requirement:24 Vdc @ 2000 mA, Ground referenced (for continuous RMS power output)
24 to 33 Vdc @ 1000 mA, Ground referenced (for normal uncompressed audio)
More Information
Brand Radio Design Labs
Manufacturer Radio Design Labs
SKU FP-PA20
UPC 813721012579
Part No FP-PA20
Weight (lb.) 1.5
Product Datasheet fp-pa20.pdf
Unit EACH
Carton Quantity 1
Description
Input:Line level (+4 dBu bal; -10 dBV unbal)
Input Impedance: 20 kΩ balanced bridging; 10 kΩ unbal
Input / Output Connector: Detachable terminal block
Gain Adjustment: Single turn audio taper
Minimum Input Levels:
Balanced: -26 dBu (to cross compressor threshold)
Unbalanced: -28 dBV (to cross compressor threshold)
Maximum Input Levels:
Balanced: +23 dBu
Unbalanced: +15 dBV
Frequency Response: 35 Hz to 50 kHz (+/- 1.5 dB)*
THD+N:
*measured at compressor threshold level equaling 4 W RMS output power
< 0.1% (@ 1 kHz)*
< 0.5% (35 Hz to 20 kHz)*
Noise:< -80 dB (below 20 W RMS)
Compressor:Threshold 6 dB below rated output, automatic adjusting attack and release
CMRR:> 55 dB (50 Hz to 120 Hz)
Output Power:20 W RMS into 8 Ω
Ambient Operating Environment:0?? C to 30?? C Max; 20?? C Recommended
Indicators (2):
Red LED:PEAK LED indicates compressor activity
Green LED:Power ON
Power Requirement:24 Vdc @ 2000 mA, Ground referenced (for continuous RMS power output)
24 to 33 Vdc @ 1000 mA, Ground referenced (for normal uncompressed audio)

Zack Electronics Large Quantity Quote Request

The Zack Electronics Quick Quote system will notify us of your interest in purchasing a large quantity of this item:

Write Your Own Review
How do you rate this product?

Write your own Review