Siemens RUGGEDCOM RS950G is an IEC 62439-3 Redundancy Box (RedBox)

Siemens RUGGEDCOM RS950G is an IEC 62439-3 Redundancy Box (RedBox)

The RUGGEDCOM RS950G is an IEC 62439-3 Redundancy Box (RedBox), supporting both High Availability Seamless Redundancy (HSR) and Parallel Redundancy Protocol (PRP). The RS950G provides the ultimate in network reliability from any network fault. This is achieved by simultaneously transmitting duplicate packets on independent routes through the network to provide complete path redundancy at the data link layer.

Ethernet Ports:

• 3 configurable copper or fiber ports - 2 IEC 62439 Ethernet ports (HSR or PRP) - 1 Access port for standard IEEE 802.3
• SFP pluggable fiber transceiver with 100FX or 1000LX/SX options
• 3 X 10/100/1000 BaseT copper ports (disabled when SFP present)
• RS232 Console Port
• Up to 70km with long-haul optics
• LED Status Indicators

RUGGEDCOM Operating System (ROS) Features:

• Simple plug and play operation – automatic learning, negotiation, and crossover detection
• RSTP (802.1w) and Enhanced Rapid Spanning Tree (eRSTP) network fault recovery (<5 ms)
• Quality of service (802.1p) for real-time traffic
• VLAN (802.1Q) with double tagging and GVRP support
• Link aggregation
• IGMP snooping for multicast filtering
• Port rate limiting and broadcast storm limiting

Each RUGGEDCOM product ordered by a customer is configured and tested at Siemens before shipment to us. Items priced based upon stated specifications here.

 Changes or modifications will increase the cost of the item.