RDL STP-1 Universal Audio Attenuator - 2 channel
Part No:
STP-1
Unit of Measure: EACH
Ships from: Arizona
$86.23
List Price:
$114.97
You save 25%
43 In stock
Is This The Right Item For Me?
800.466.0449
800.466.0449

Nominal Impedance: | HI-Z 10 kΩ; LO-Z 600 Ω |
Adjustment: | Screwdriver trimming adjustment, 15 turns continuous |
Circuit Type: | Passive modified H & T pads |
Connections: | Terminal block accepts 14 to 24 guage wire; no lugs required; input/output connection legend located on STP-1 |
Maximum Signal Inputs: | |
HI-Z Balanced Line: | +33 dBu, 35 V rms |
LO-Z Balanced Line: | +27 dBu, 18 V rms |
HI-Z Unbalanced Line: | +35 dBV, 45 V rms |
Reference Levels: | Line level is +10 dBu to -10 dBu Mic level is -45 dBu to -65 dBu |
Power Requirement: | Passive (not required) |
Ambient Operating Environment: | -20 C to 60 C |
Brand | Radio Design Labs | ||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Manufacturer | Radio Design Labs | ||||||||||||||||||||||
SKU | STP-1 | ||||||||||||||||||||||
UPC | 813721011268 | ||||||||||||||||||||||
Part No | STP-1 | ||||||||||||||||||||||
Weight (lb.) | 0.5 | ||||||||||||||||||||||
Product Datasheet | stp-1.pdf | ||||||||||||||||||||||
Unit | EACH | ||||||||||||||||||||||
Carton Quantity | 1 | ||||||||||||||||||||||
Short Description | The STP-1 is a pair of convenient attenuator pads that can be located at the precise location that attenuation is needed. The low-cost STP-1 eliminates the costly labor of figuring and assembling fixed pads. Multi-turn trimmers in the STP-1 permit precise adjustment of levels without the need to connect any jumpers or external resistors. The STP-1 operates in either high or low impedance, balanced or unbalanced circuits. The wiring legend is printed on the case for easy installation. |
||||||||||||||||||||||
Description |
|
Write Your Own Review