RDL STA-1M Audio Line Amplifier - Mono: -14 to 14 dB Gain
Part No:
STA-1M
Unit of Measure: EACH
Ships from: Arizona
$154.97
List Price:
$206.63
You save 25%
73 In stock
Is This The Right Item For Me?
800.466.0449
800.466.0449
| Input: | 10 kΩ balanced or unbalanced bridge |
| Outputs (2): | 150 Ω balanced to drive low or high-Z; 75 Ω unbalanced |
| Output Signal: | +4 dBu (nominal, adjustable) |
| Frequency Response: | 10 Hz to 20 kHz (+/-0.25 dB) |
| THD+N: | < 0.05% |
| Headroom above +4 dBu: | > 18 dB |
| CMRR: | > 50 dB at full gain (100 Hz) |
| Gain: | Adjustable per chart below |
| Input/Output | Min Gain/Max Gain |
| Unbal. Balanced | -7 dB +14 dB |
| Bal. Balanced | -7 dB +14 dB |
| Bal. Unbalanced | -14 dB +7 dB |
| Unbal. Unbalanced | -14 dB +7 dB |
| Power Requirement: | GROUND-REFERENCED or FLOATING, 24 to 33 Vdc @ 50 mA |
| Ambient Operating Environment: | 0° C to 55° C |
| Brand | Radio Design Labs | ||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Manufacturer | Radio Design Labs | ||||||||||||||||||||||||||||||
| SKU | STA-1M | ||||||||||||||||||||||||||||||
| UPC | 813721010988 | ||||||||||||||||||||||||||||||
| Part No | STA-1M | ||||||||||||||||||||||||||||||
| Weight (lb.) | 0.5 | ||||||||||||||||||||||||||||||
| Product Datasheet | sta-1m.pdf | ||||||||||||||||||||||||||||||
| Unit | EACH | ||||||||||||||||||||||||||||||
| Carton Quantity | 1 | ||||||||||||||||||||||||||||||
| Short Description | The STA-1M allows bridging any audio line, adjusting the gain, and driving a balanced or unbalanced line. The circuit design allows the input to accept either balanced or unbalanced signals, of either high or low impedance. This is an instrumentation type input stage which will amplify the differential input, regardless of ground reference. The output is capable of driving either high or low impedance loads, and the output may be connected either balanced or unbalanced. RDL???s SupplyFlex power input configuration is included in the STA-1M. The power supply input may be fed from a floating (not ground-referenced) 24 Vdc power source, from a bipolar power supply (+/ 12 Vdc or +/-15 Vdc) or from a ground-referenced 24 Vdc power supply. |
||||||||||||||||||||||||||||||
| Description |
|
Write Your Own Review
Related Products
-
RDL ST-VP1 Voice-Over - Paging Module - Manual![radio design labs]( "Radio Design Labs")
Part No: ST-VP1Your Price $194.44List Price $259.25You Save 25%11 In stock -
-
RDL STA-2A Dual High Gain Line Amplifiers![radio design labs]( "Radio Design Labs")
Part No: STA-2AYour Price $222.51List Price $296.68You Save 25%13 In stock -
-
RDL STA-1 Dual Balanced-Unbalanced Line Amplifier -12 to 20 dB Gain![radio design labs]( "Radio Design Labs")
Part No: STA-1Your Price $211.96List Price $282.61You Save 25%202 In stock -
-
RDL ST-VOX1 Voice Operated Relay![radio design labs]( "Radio Design Labs")
Part No: ST-VOX1Your Price $147.92List Price $197.22You Save 25%14 In stock -
