RDL ST-ACR2 Line-Level Audio Controlled Relay - 5 to 50 s delay
Part No:
ST-ACR2
Unit of Measure: EACH
Ships from: Arizona
$139.99
List Price:
$186.65
You save 25%
215 In stock
Is This The Right Item For Me?
800.466.0449
800.466.0449
Audio Input: | 10 kΩ balanced bridging |
Input Connections: | May be connected balanced or unbalanced |
Control Output | Open-collector @ 25 mA suitable to drive indicators or slave LCR relay |
Indicators: | Audio threshold LED (for setting sensitivity) |
Retrigger Delay | 250 ms |
Contacts: | Double-pole-double-throw |
Max. Switching Power: | 60 W, 125 VA |
Max. Switching Voltage: | 220 Vdc, 250 Vac |
Max. Switching Current: | 2 A |
Max. Carrying Current: | 3 A |
Activation Response Time: | 25 ms |
Input Sensitivity: | -30 dBu to 0 dBu (adjustable) |
Relay Release Delay: | 5 sec. to 50 sec. nominal (adjustable) |
Power Requirement | GROUND-REFERENCED, 24 to 33 Vdc @ 50 mA* * Assumes 20 mA max load at SLAVE output |
Ambient Operating Environment: | 0° C to 55° C |
Brand | Radio Design Labs | ||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Manufacturer | Radio Design Labs | ||||||||||||||||||||||||||||||
SKU | ST-ACR2 | ||||||||||||||||||||||||||||||
UPC | 813721011176 | ||||||||||||||||||||||||||||||
Part No | ST-ACR2 | ||||||||||||||||||||||||||||||
Weight (lb.) | 0.5 | ||||||||||||||||||||||||||||||
Product Datasheet | st-acr.pdf | ||||||||||||||||||||||||||||||
Unit | EACH | ||||||||||||||||||||||||||||||
Carton Quantity | 1 | ||||||||||||||||||||||||||||||
Short Description | The ST-ACR2 is an Audio Controlled Relay in the STICK-ON® series. These products are designed for quick, convenient installation, and reliable operation in a variety of control applications. The ST-ACR2 is designed to switch on line level sources. Two multiturn trimmers are provided. The SENS potentiometer adjusts the audio input sensitivity. A threshold LED facilitates accurate adjustment. The module can be set to trigger on signals between -30 dBu and 0 dBu. The DELAY control sets the time required for the relay to release when the audio drops below the threshold. The delay adjustment range for the ST-ACR2 is from 5 seconds to 50 seconds. |
||||||||||||||||||||||||||||||
Description |
|
Write Your Own Review