Radio Design Labs ST-HP3 High Pass Filter - 300 Hz and 500 Hz
Part No:
ST-HP3
Unit of Measure: EACH
Ships from: Arizona
$173.78
List Price:
$231.70
You save 25%
20 In stock
Is This The Right Item For Me?
800.466.0449
800.466.0449
| Input: | 20 kΩ balanced line level (+4 dBu) |
| Outputs (2): | 150 Ω balanced line level (+4 dBu) |
| Headroom: | > 18 dB |
| Attenuation Curve: | 18 dB/octave |
| THD+N: | < 0.01% |
| Residual Noise: | < 90 dB (referred to +4 dBu) |
| Insertion Loss: | < 2 dB |
| 300 Hz Output: | |
| Frequency Response: | 300 Hz to 30 kHz (+/- 0.5 dB) |
| -3 dB Frequency: | 225 Hz |
| 500 Hz Output: | |
| Frequency Response: | 500 Hz to 30 kHz (+/- 1.0 dB) |
| -3 dB Frequency: | 450 Hz |
| Power Requirement: | GROUND-REFERENCED or FLOATING, 24 to 33 Vdc @ 30 mA |
| Ambient Operating Environment: | 0C to 55C |
| Brand | Radio Design Labs | ||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Manufacturer | Radio Design Labs | ||||||||||||||||||||||||||||||
| SKU | ST-HP3 | ||||||||||||||||||||||||||||||
| UPC | 813721012326 | ||||||||||||||||||||||||||||||
| Part No | ST-HP3 | ||||||||||||||||||||||||||||||
| Weight (lb.) | 0.5 | ||||||||||||||||||||||||||||||
| Product Datasheet | st-hp3.pdf | ||||||||||||||||||||||||||||||
| Unit | EACH | ||||||||||||||||||||||||||||||
| Carton Quantity | 1 | ||||||||||||||||||||||||||||||
| Short Description | The ST-HP3 is the ideal choice where line-level audio filtering needs to be provided at the input of a power amplifier for protection of public address horns against damage from low frequencies. The ST-HP3 has one input and two filtered outputs: 300 Hz high pass and 500 Hz high pass. Both the input and output are balanced, and each may be wired unbalanced if required. The input accepts line-level (+4 dBu nominal) audio. The module operates at unity gain (balanced input and output). The two outputs may be used simultaneously. The ST-HP3 features RDL???s SupplyFlex power input configuration for operation directly from ground-referenced, floating or bipolar 24 Vdc power. |
||||||||||||||||||||||||||||||
| Description |
|
||||||||||||||||||||||||||||||
Write Your Own Review
Related Products
-
Radio Design Labs ST-PA2 2W Mono Audio Amplifier - 8 Ω![radio design labs]( "Radio Design Labs")
Part No: ST-PA2Your Price $98.28List Price $131.04You Save 25%65 In stock -
-
Radio Design Labs ST-GLA1 Gated Line Amplifier - Noise Gate![radio design labs]( "Radio Design Labs")
Part No: ST-GLA1Your Price $172.46List Price $229.95You Save 25%29 In stock -
-
Radio Design Labs ST-PA18 18W Mono Audio Amplifier - 8 Ω![radio design labs]( "Radio Design Labs")
Part No: ST-PA18Your Price $179.09List Price $238.79You Save 25%91 In stock -
-
Radio Design Labs ST-CX2S Subwoofer Crossover Filter![radio design labs]( "Radio Design Labs")
Part No: ST-CX2SYour Price $174.13List Price $232.17You Save 25%20 In stock -
