Key Features include

HDBaseT via Single CAT5e/6 UTP/STP Extension: With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length
KD-X222PO: Features power extension from Tx to Rx with Power Over HDBaseT, Rx unit does not require power supply
Signal Extension:
- Up to 150 ft. @ 4K 24/25/30(4:4:4)/60(4:2:0) using KD-CAT6STP1X cabling
- Up to 125 ft. @ 4K 24/25/30(4:4:4)/60(4:2:0) using third-party CAT5e/6UTP/STP cabling
- Up to 250 ft. @ 1080p /1920x1200 using KD-CAT6STP1X cabling
- Up to 230 ft. @ 1080p /1920x1200 using third-party CAT5e/6 cabling
HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant
HDR (High Dynamic Range): More life-like images through a greater range of luminance levels
4K/UHD Resolution: Supports signals up to 4096x2160 60Hz [4:2:0] 8bit, 4096x2160 30Hz [4:2:2] 12bit, and 4096x2160 30Hz [4:4:4] 8bit
Deep Color Support: Up to UHD/4K 30Hz 4:2:2/12 bits or 60Hz 4:2:0/8 bit
3D: Support for standard 3D stereoscopic signal formats
Low Profile: Super slim chassis design
HDMI and HDCP Licensing: Fully licensed and compatible with HDCP 2.2 and HDMI latest technology such as 4K/UHD 4:2:0/8bit at 60f/s
EDID Control: Internal library features 15 default EDID configurations and native EDID data from Output/Display devices connected via Rx
Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected input devices
Full Buffer System: Manages TMDS re-clocking / signal re-generation, HDCP authentication with source & display, EDID Control handshake, and Hot Plug control
IR Sensor: Sensor powering via +5V on Rx unit?s IR In port collects line-of-sight IR from remote(s) without external IR connecting block
Up/Down IR: Two channels of IR enable control to/from devices connected to Tx and Rx units
RS-232: Bi-Directional control to/from Tx and Rx unit on Phoenix connector
Rotary Switch RS-232 Control Mode: Provides control of Tx unit as well as connectivity status
Lossless compressed digital audio: Support for Dolby TrueHD, Dolby Digital Plus, Dolby Atmos, and DTS-HD Master Audio
CEC Support: For inter-device control between input and output HDMI channel

More Information
Brand	Key Digital
Manufacturer	Key Digital
SKU	KD-X222PO
UPC	815996020204
Part No	KD-X222PO
Weight (lb.)	0.53
Product Datasheet	http://keydigital.com/downloads/KDX222PO/KD-X222_X222PO_Manual_SW811J18.pdf
Product Datasheet 1	http://keydigital.com/downloads/KDX222PO/KD-X222_X222PO_Manual_SW811J18.pdf
Product Datasheet 2	http://keydigital.com/downloads/KDX222PO/KD-X222PO_CatalogPage_FRVJZS5P.pdf
Product Datasheet 3	http://keydigital.com/downloads/KDX222PO/KD-X222_AppExample_2D2C24PR.pdf
Unit	EACH
Lead Time	2
Short Description	Key Digital KD-X222PO is fully controllable by all RS-232 supported control systems via open API: Compass Control, AMX, Crestron, KNX, RTI, Savant, URC, Leviton etc.
Description	Key Features include HDBaseT via Single CAT5e/6 UTP/STP Extension: With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length KD-X222PO: Features power extension from Tx to Rx with Power Over HDBaseT, Rx unit does not require power supply Signal Extension: Up to 150 ft. @ 4K 24/25/30(4:4:4)/60(4:2:0) using KD-CAT6STP1X cabling Up to 125 ft. @ 4K 24/25/30(4:4:4)/60(4:2:0) using third-party CAT5e/6UTP/STP cabling Up to 250 ft. @ 1080p /1920x1200 using KD-CAT6STP1X cabling Up to 230 ft. @ 1080p /1920x1200 using third-party CAT5e/6 cabling HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant HDR (High Dynamic Range): More life-like images through a greater range of luminance levels 4K/UHD Resolution: Supports signals up to 4096x2160 60Hz [4:2:0] 8bit, 4096x2160 30Hz [4:2:2] 12bit, and 4096x2160 30Hz [4:4:4] 8bit Deep Color Support: Up to UHD/4K 30Hz 4:2:2/12 bits or 60Hz 4:2:0/8 bit 3D: Support for standard 3D stereoscopic signal formats Low Profile: Super slim chassis design HDMI and HDCP Licensing: Fully licensed and compatible with HDCP 2.2 and HDMI latest technology such as 4K/UHD 4:2:0/8bit at 60f/s EDID Control: Internal library features 15 default EDID configurations and native EDID data from Output/Display devices connected via Rx Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected input devices Full Buffer System: Manages TMDS re-clocking / signal re-generation, HDCP authentication with source & display, EDID Control handshake, and Hot Plug control IR Sensor: Sensor powering via +5V on Rx unit?s IR In port collects line-of-sight IR from remote(s) without external IR connecting block Up/Down IR: Two channels of IR enable control to/from devices connected to Tx and Rx units RS-232: Bi-Directional control to/from Tx and Rx unit on Phoenix connector Rotary Switch RS-232 Control Mode: Provides control of Tx unit as well as connectivity status Lossless compressed digital audio: Support for Dolby TrueHD, Dolby Digital Plus, Dolby Atmos, and DTS-HD Master Audio CEC Support: For inter-device control between input and output HDMI channel
SPECIFICATIONS	Regulation: CE, RoHS, WEEE Enclosure: Black Metal Product (Each): 4.1? x 2.8? x 0.875?, Weight: 0.75 lbs Power (Tx Only): KD-PS12V2ASC, 12V/2A, 100-240VAC, 50-60Hz, Interchangeable head with screw-in connector Accessories: (2) Mounting Brackets, (1) IR Emitter, (1) IR Sensor

Request Large QTY

Zack Electronics Large Quantity Quote Request

The Zack Electronics Quick Quote system will notify us of your interest in purchasing a large quantity of this item:

Company Name

First Name

Last Name

Street Address

Zip/Postal Code

Apt / Suite / Bldg #

City

Country

State/Province

Phone Number

Fax

Email

Website

Quantity

Target Price (US $)

Will you accept product that is equivalent to your request in here?

Yes

No

Comment

One time buy

Scheduled order (We will confirm to you via a quote the delivery schedule)

Reviews

Key Digital 4K POH/HDBaseT/HDMI Extenders (KD-X222PO)

Zack Electronics Large Quantity Quote Request

Write your own Review