HDBaseT 4K/18G POH/HDMI Extenders (Includes KIT TX/RX 4K/40Meters 1080P/70Meters)
Part No:
KD-X444S
Ships from: New York
$395.00
List Price:
$429.99
You save 8%
10 In stock
Is This The Right Item For Me?
800.466.0449
800.466.0449

HDBaseT via Single CAT5e/6 UTP/STP Extension: With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length
4K Support: 4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth)
Flexible Power over HDBaseT: Only one power connection needed. Tx may power Rx, or Rx may power Tx.
Low Profile: Super slim chassis design
Signal Extension: For resolution and cable quality
4K/UHD: Up to 130 ft. (40m) using CAT5e/6
1080p: Up to 230 ft. (70m) maximum (Valens VS10)
10G Pass-thru: Mode enables uncompressed 10.2Gbps signal extension
HDR10 (High Dynamic Range): More life-like images through a greater range of luminance levels
HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant+
Deep Color Support: Up to UHD/4K 30Hz 4:4:4/12 bits or 60Hz 4:4:4/8 bit
EDID Control: Internal library with 15 EDID handshakes including 4K with HDR in addition to native EDID data from Output/Display device connected to Rx
Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected input and output devices
Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication with source & display, EDID Control handshake, and Hot Plug Detection control
IR Sensor: Sensor powering via +5V on IR In ports collects line-of-sight IR from remote(s) without external IR connecting block
Up/Down IR: Two channels of IR enable control to/from devices or control systems connected to Tx and Rx units
RS-232: Bi-Directional control to/from Tx and Rx unit on Phoenix connector
Lossless compressed digital audio: Support for Dolby® TrueHD, Dolby® Digital Plus, Dolby Atmos®, and DTS-HD Master Audio™
CEC Pass-thru: For inter-device control between input and output HDMI channel
Technical:
Inputs Tx (Each): 1 HDMI, 1 IR, 1 RS-232
Outputs Tx (Each): 1 HDBaseT, 1 IR, 1 RS-232
Inputs Rx (Each): 1 HDBaseT, 1 IR, 1 RS-232
Outputs Rx (Each): 1 HDMI, 1 IR, 1 RS-232
Bandwidth: TMDS bandwidth 18Gbps
Deep Color Support: Digital video formats in Deep Color Mode up to 12 bits per color
DDC Communication: EDID and HDCP Bi-directional buffering from Display to Source
HDMI Connector: Type A, 19 Pin Female
RJ45 Connector: Shielded Link Connector, HDBaseT
IR Connector: 4-pin Phoenix
RS-232 Connector: 3-pin Phoenix
Power: (1) 12V/1.66A, 20W DC Power Supply (Screw-In Type). 100-240VAC, 50-60Hz. Interchangeable transformer plug with screw-in connector. SKU: KD-PS20W12VQ
General:
Regulation: CE, RoHS, WEEE, EAC
Enclosure: Black Metal
Product (Each): 4.1” x 2.8” x 0.875”, Weight: 0.75 lbs
Brand | Key Digital |
---|---|
Manufacturer | Key Digital |
SKU | KD-X444S |
UPC | 815996020709 |
Part No | KD-X444S |
Item Height | 3.5 |
Item Length | 8 |
Item Width | 5 |
Weight (lb.) | 1 |
Carton Quantity | 12 |
Description | HDBaseT via Single CAT5e/6 UTP/STP Extension: With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length 4K Support: 4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth) Flexible Power over HDBaseT: Only one power connection needed. Tx may power Rx, or Rx may power Tx. Low Profile: Super slim chassis design Signal Extension: For resolution and cable quality 4K/UHD: Up to 130 ft. (40m) using CAT5e/6 1080p: Up to 230 ft. (70m) maximum (Valens VS10) 10G Pass-thru: Mode enables uncompressed 10.2Gbps signal extension HDR10 (High Dynamic Range): More life-like images through a greater range of luminance levels HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant+ Deep Color Support: Up to UHD/4K 30Hz 4:4:4/12 bits or 60Hz 4:4:4/8 bit EDID Control: Internal library with 15 EDID handshakes including 4K with HDR in addition to native EDID data from Output/Display device connected to Rx Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected input and output devices Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication with source & display, EDID Control handshake, and Hot Plug Detection control IR Sensor: Sensor powering via +5V on IR In ports collects line-of-sight IR from remote(s) without external IR connecting block Up/Down IR: Two channels of IR enable control to/from devices or control systems connected to Tx and Rx units RS-232: Bi-Directional control to/from Tx and Rx unit on Phoenix connector Lossless compressed digital audio: Support for Dolby® TrueHD, Dolby® Digital Plus, Dolby Atmos®, and DTS-HD Master Audio™ CEC Pass-thru: For inter-device control between input and output HDMI channel Technical: Inputs Tx (Each): 1 HDMI, 1 IR, 1 RS-232 Outputs Tx (Each): 1 HDBaseT, 1 IR, 1 RS-232 Inputs Rx (Each): 1 HDBaseT, 1 IR, 1 RS-232 Outputs Rx (Each): 1 HDMI, 1 IR, 1 RS-232 Bandwidth: TMDS bandwidth 18Gbps Deep Color Support: Digital video formats in Deep Color Mode up to 12 bits per color DDC Communication: EDID and HDCP Bi-directional buffering from Display to Source HDMI Connector: Type A, 19 Pin Female RJ45 Connector: Shielded Link Connector, HDBaseT IR Connector: 4-pin Phoenix RS-232 Connector: 3-pin Phoenix Power: (1) 12V/1.66A, 20W DC Power Supply (Screw-In Type). 100-240VAC, 50-60Hz. Interchangeable transformer plug with screw-in connector. SKU: KD-PS20W12VQ General: Regulation: CE, RoHS, WEEE, EAC Enclosure: Black Metal Product (Each): 4.1” x 2.8” x 0.875”, Weight: 0.75 lbs |
Write Your Own Review