Eclipse Tools 902-541 Battery Operated Crimper

Description

• High pressure 12 ton crimping force
• Micro computer control system automatically detects pressure while crimping.
• Pressure releases automatically - The tool will stop pressing and release 90% of its force when pressure reaches maximum value.
• The tool is equipped with a double piston pump which quickly makes contact to the material and then transitions to a slower, high pressure crimp.
• The crimping head has a 350 degree range of movement in order to gain better acces to tight corners and other difficult working areas.
• If a deviation from the set operation or a low battery charge is detected then an audible warning and red display flashes.
• Easy to use one trigger control
  Full squeeze trigger to start working 
  Half squeeze to stop applying pressure 
  Rlease trigger to return piston to original position
• Li-ion batteries do not have memory and will not self discharge. Even after long periods of non-operation the tool is always ready to operate. 50% more capacity and shorter charging cycles compared to NiMH batteries.
• A temperature sensor makes the tool stop working if it reaches 140 degreen ferenheit. It will return to normal working operation once the tool has cooled down.