RDL 2 Channel Remote Control for STICK-ONs (D-RC2ST)
Part No:
D-RC2ST
Ships from: Arizona
$141.99
List Price:
$189.99
You save 25%
10 In stock
Is This The Right Item For Me?
800.466.0449
800.466.0449
The front panel of the D-RC2ST features two pushbuttons with two associated LEDs. Upon initial power-up, source 1 is selected. Touching the other button de-selects source 1 and immediately selects source 2. An LED adjacent to each button shows which source is selected.
In a typical installation, the D-RC2ST may be used to select between two audio or video sources, or to route audio to two destinations. To select between two audio sources, the D-RC2ST is connected to an RDL ST-SSR1 Solid-State Audio Switch. For video switching, an RDL TX-MVX may be used. For audio routing, an RDL ST-RX2 is used. In each of the above examples, only one output terminal is needed for triggering. Therefore a single shielded pair (or 3-conductor cable) is required for remote connection. For more complex switching networks, both outputs may be used.
| Brand | Radio Design Labs |
|---|---|
| Manufacturer | Radio Design Labs |
| SKU | D-RC2ST |
| UPC | 641125223563 |
| Part No | D-RC2ST |
| Weight (lb.) | 0.35 |
| Product Datasheet | http://www.rdlnet.com/downloads/datasheets/db-rc2st.pdf |
| Short Description | Features: Remote Selection of 2 Audio Sources, Destinations or Functions Single-Button Selection for Each Source Open-collector Switching of 1 of 2 Module Functions 3-wire or 4-wire Remote Wiring Professional Aesthetic Appearance Companion to other RDL® Remote Controls |
| Description | The front panel of the D-RC2ST features two pushbuttons with two associated LEDs. Upon initial power-up, source 1 is selected. Touching the other button de-selects source 1 and immediately selects source 2. An LED adjacent to each button shows which source is selected. In a typical installation, the D-RC2ST may be used to select between two audio or video sources, or to route audio to two destinations. To select between two audio sources, the D-RC2ST is connected to an RDL ST-SSR1 Solid-State Audio Switch. For video switching, an RDL TX-MVX may be used. For audio routing, an RDL ST-RX2 is used. In each of the above examples, only one output terminal is needed for triggering. Therefore a single shielded pair (or 3-conductor cable) is required for remote connection. For more complex switching networks, both outputs may be used. |
Write Your Own Review