Zack Direct LOCTITE LT82196 Super Glue Gel

Part No:
LT82196
Unit of Measure: pack
$4.99
10 In stock
Is This The Right Item For Me?
800.466.0449

Zack Direct LOCTITE LT82196 Super Glue Gel

Loctite Super Glue Gel has proven superior performance over ordinary super glues. It works faster and holds stronger on more surfaces than ordinary instant adhesives thanks to a patented additive. The gel formula works on a variety of porous and non-porous surfaces and is ideal for vertical surfaces and small gaps. Loctite Super Glue Gel comes in a self-piercing tube; it dries clear and sets without clamping. It is also resistant to moisture, most chemicals and freezing temperatures.

Recommended For

  • Bonding leather, cork, paper, cardboard, wood, chipboard, fabric, metal, ceramic, rubber and hard plastics such as Plexiglass, polycarbonate, polystyrene and PVC
  • Repairing figurines, costume jewelry, cameras, toys, metal car parts, wiper blades, rubber seals and O-rings
  • Ideal for vertical surfaces

Not Recommended For

  • Exterior applications
  • Use on repairs needing high flexibility or for gap filling applications
  • Styrofoam, foam rubber, pure bone china, glass, silicone rubber, PTFE, polyethylene and polypropylene
  • Glazed surfaces
  • Use in dishwasher, oven or microwave

Feature

Benefit

Dries transparent

Invisible repairs

Sets in seconds

No clamping required

Gel formula

No-drip gel formulation. Ideal for vertical surfaces and for bonding porous materials.

Self-piercing tube

No pins required. Less mess application.

Clog-free cap

Maximizes useful life of product.

Safety Precautions

Apply in a well ventilated area. Wear gloves.

Preparation

Surfaces must be close fitting with no gaps, clean, dry and free from oil, wax and paint. Protect work area. Lightly roughen smooth surfaces for better adhesion. Pre-fit parts to be joined.

Application

In a clock-wise direction, screw the cap and nozzle assembly down all the way to the tube shoulder, puncturing the tube. Remove the cap counter clockwise from the nozzle. Apply sparingly to one side only using approximately one drop per square inch of surface. Press surfaces together immediately. Hold in place for 15 to 60 seconds until bond sets. Do not reposition parts. Clean tip with tissue and replace the cap.

Cleanup

Use Duro Super Glue Remover to clean up uncured adhesive residue. Cured adhesive may be cut away with caution using a sharp blade, removed with acetone or with boiling water.

More Information
Brand ZACK Direct
Manufacturer Zack Direct
SKU LT82196
Part No LT82196
Weight (lb.) 0.01
Unit pack
Carton Quantity 2
Description

Zack Direct LOCTITE LT82196 Super Glue Gel

Loctite Super Glue Gel has proven superior performance over ordinary super glues. It works faster and holds stronger on more surfaces than ordinary instant adhesives thanks to a patented additive. The gel formula works on a variety of porous and non-porous surfaces and is ideal for vertical surfaces and small gaps. Loctite Super Glue Gel comes in a self-piercing tube; it dries clear and sets without clamping. It is also resistant to moisture, most chemicals and freezing temperatures.

Recommended For

  • Bonding leather, cork, paper, cardboard, wood, chipboard, fabric, metal, ceramic, rubber and hard plastics such as Plexiglass, polycarbonate, polystyrene and PVC
  • Repairing figurines, costume jewelry, cameras, toys, metal car parts, wiper blades, rubber seals and O-rings
  • Ideal for vertical surfaces

Not Recommended For

  • Exterior applications
  • Use on repairs needing high flexibility or for gap filling applications
  • Styrofoam, foam rubber, pure bone china, glass, silicone rubber, PTFE, polyethylene and polypropylene
  • Glazed surfaces
  • Use in dishwasher, oven or microwave

Feature

Benefit

Dries transparent

Invisible repairs

Sets in seconds

No clamping required

Gel formula

No-drip gel formulation. Ideal for vertical surfaces and for bonding porous materials.

Self-piercing tube

No pins required. Less mess application.

Clog-free cap

Maximizes useful life of product.

Safety Precautions

Apply in a well ventilated area. Wear gloves.

Preparation

Surfaces must be close fitting with no gaps, clean, dry and free from oil, wax and paint. Protect work area. Lightly roughen smooth surfaces for better adhesion. Pre-fit parts to be joined.

Application

In a clock-wise direction, screw the cap and nozzle assembly down all the way to the tube shoulder, puncturing the tube. Remove the cap counter clockwise from the nozzle. Apply sparingly to one side only using approximately one drop per square inch of surface. Press surfaces together immediately. Hold in place for 15 to 60 seconds until bond sets. Do not reposition parts. Clean tip with tissue and replace the cap.

Cleanup

Use Duro Super Glue Remover to clean up uncured adhesive residue. Cured adhesive may be cut away with caution using a sharp blade, removed with acetone or with boiling water.

Zack Electronics Large Quantity Quote Request

The Zack Electronics Quick Quote system will notify us of your interest in purchasing a large quantity of this item:

Write Your Own Review
How do you rate this product?

Write your own Review