Zack Direct LOCTITE LT25827 Stik'n Seal Indoor Adhesive
800.466.0449
Zack Direct LOCTITE LT25827 Stik’n Seal Indoor Adhesive
Recommended For
- Mending picture frames, securing loose tiles and fixing boot soles
- Bonding brick, cement, ceramic, glass, leather, rubber, wood, tile, fabric and most plastics
- Fixing glassware, ceramic mugs and sealing garden hoses
Not Recommended For
- Metals that will corrode
- Polyethylene, polypropylene, Nylon™ or Teflon
- Natural marble (causes staining)
- Mirrors
Feature |
Benefit |
|
Dries transparent |
Invisible repairs |
|
Thick consistency |
Will not run. Reduces clean-up. |
|
Water resistant |
Can use outdoors |
|
Solvent-free |
Low odor, non-toxic |
Safety Precautions
Gloves for prolonged contact.
Preparation
Protect work area. Surfaces to be glued or sealed must be clean and dry. Pre-fit all materials before applying adhesive. Pierce tube seal with the reverse side of the cap.
Application
As an Adhesive: Apply to both surfaces. Wait for 5 minutes then press surfaces together. Sets in about 10 minutes. Fully cured in 24 hours.
As a Sealant: Apply a layer 6 mm (1/4”) thick over the area to be sealed. Let dry for 24 hours. If necessary, apply a second coat.
Cleanup
Clean tools and adhesive residue immediately with water. Cured sealant may be carefully cut away with a sharp-edged tool.
| Brand | ZACK Direct | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Manufacturer | Zack Direct | ||||||||||
| SKU | LT25827 | ||||||||||
| Part No | LT25827 | ||||||||||
| Weight (lb.) | 0.05 | ||||||||||
| Unit | EACH | ||||||||||
| Carton Quantity | 1 | ||||||||||
| Description | Zack Direct LOCTITE LT25827 Stik’n Seal Indoor Adhesive Recommended For
Not Recommended For
Safety Precautions Gloves for prolonged contact. Preparation Protect work area. Surfaces to be glued or sealed must be clean and dry. Pre-fit all materials before applying adhesive. Pierce tube seal with the reverse side of the cap. Application As an Adhesive: Apply to both surfaces. Wait for 5 minutes then press surfaces together. Sets in about 10 minutes. Fully cured in 24 hours. Cleanup Clean tools and adhesive residue immediately with water. Cured sealant may be carefully cut away with a sharp-edged tool. |
