RDL RU-EQ3 Three Band Audio Equalizer with Knobs - Terminal block

Part No:
RU-EQ3
Unit of Measure: EACH
Ships from: Arizona
$252.42
List Price: $336.56
  
You save 25%
11 In stock
Is This The Right Item For Me?
800.466.0449
Input:100 kΩ balanced or unbalanced bridging; line-level
THD+N:< 0.030%; 0.010% typ. (1 kHz, +4 dBu reference; flat response)
CMRR:> 60 dB (100 Hz)
Frequency Response:20 Hz to 22 kHz (EQ set flat; +/- 0.5 dB into 600 Ω)
10 Hz to 22 kHz (EQ set flat; +/- 0.5 dB into 10 kΩ)
Noise:< -80 dB (below +4 dBu)
Center Frequencies:Low Band: 80 Hz
Mid Band: 1 kHz
High Band: 30 kHz
Bandwidth:Low Band: 20 Hz to 300 Hz
Mid Band: 200 Hz to 7 kHz
High Band: 3 kHz to 30 kHz
Power Requirement:GROUND-REFERENCED, 24 to 33 Vdc @ 25 mA
Ambient Operating Environment:0° C to 55° C
More Information
Brand Radio Design Labs
Manufacturer Radio Design Labs
SKU RU-EQ3
UPC 813721012777
Part No RU-EQ3
Weight (lb.) 1
Product Datasheet ru-eq23.pdf
Unit EACH
Carton Quantity 1
Short Description

The RU-EQ3 features a balanced bridging input, which may be connected unbalanced if desired. The output driver is 150 Ω balanced, and is intended to drive unbalanced or balanced lines of 150 Ω or higher impedance. Front-panel knobs provide active equalization, each controlling a separate audio band. These bands were carefully selected to yield a module that works effectively in a wide variety of systems. Each band???s center frequency can be either boosted or attenuated by at least 12 dB. The Q of the low and high band equalizers was selected so that those controls can be functionally considered as a total bass band or treble band control. The RU-EQ3 adds a third control. This midrange control is optimized to voice band adjustment, with the overlap tailored to provide smooth operation for wideband music applications. The RU-EQ3's OVERLOAD indicator flashes if either the input or output stage clips.

Description
Input:100 kΩ balanced or unbalanced bridging; line-level
THD+N:< 0.030%; 0.010% typ. (1 kHz, +4 dBu reference; flat response)
CMRR:> 60 dB (100 Hz)
Frequency Response:20 Hz to 22 kHz (EQ set flat; +/- 0.5 dB into 600 Ω)
10 Hz to 22 kHz (EQ set flat; +/- 0.5 dB into 10 kΩ)
Noise:< -80 dB (below +4 dBu)
Center Frequencies:Low Band: 80 Hz
Mid Band: 1 kHz
High Band: 30 kHz
Bandwidth:Low Band: 20 Hz to 300 Hz
Mid Band: 200 Hz to 7 kHz
High Band: 3 kHz to 30 kHz
Power Requirement:GROUND-REFERENCED, 24 to 33 Vdc @ 25 mA
Ambient Operating Environment:0° C to 55° C

Zack Electronics Large Quantity Quote Request

The Zack Electronics Quick Quote system will notify us of your interest in purchasing a large quantity of this item:

Write Your Own Review
How do you rate this product?

Write your own Review