Part #: TCC-75FF   Manufacturer:

Product Description

Supports HDMI and DVI High Resolution for 1080p & 3-D
Requires two separate lead changers on both ends or optional wall-plates or floor-plates

Color: Black
Lengths: 20ft., 35ft., 50ft., 75ft., 100ft., & 125ft.
Cable: CL2/CL3 & CSA FT-4 Rated for Inwall
Accessories: Pull caps and locking rings.

Flexibility...
Get the flexibility & versatility to do your installs easier and faster with effortless installation with AWG's TransConn Cable short for Transformable Connecting Cables change your mind without incurring a new cost for another brand new cable.

No More Field Termination...
Save your company time and labor when you install this cable or even accommodate a last minute changes and also reduce service calls for faulty on the field termination. The best part of it is the connections are interchangeable so you can increase your productivity and returns.

Future proof your integration with 1 cable that can interchange for multiple uses...
The TransConn Cable is a Commercial Grade 24awg CL-2/3 & FT-4 Rated. Future proof your integration with one cable that can interchange for multiple uses. The TransConn structure cable are terminated with two female din connector ends to eliminate the risk of damaging the pins. A pull cap is also provided with a pulling slot to provide easy installation and pull through. An arrow on the connectors is also provided to provide a guide to connect the structure cable with the various leads. The TransConn cable will allow you to interchange your connections at anytime without having to re-run another cable or pull anything out of the wall instead just change the various combination leads that is currently offered. The small connector is precisely designed to slide easily through a 3/4" conduit and machined slightly so it is tapered on the rear to provide enough relief for the connector to glide through a 90 degree sweep.

Easy mate connections...
The male connector lead changers comes with an arrow the same as the structure female connectors. Just aligned the arrows as a guide to connect and tighten the knurl knob for a 100% tight connection. Only AWG's break away lead changer cables features can lock in combination with the wall-plates, floor-plates and hard-wares that have the locking screw for an even more secure connection.


For installs that is using 50ft. or longer structure cable a Digital Amp is required for a 1080p or 3-D application. ***Please note that straight passive cables you can only run Digital signals with Digital signals or Analog signals with Analog signals only. For Analog to Digital signals or vice versa you would need a chip-set converter box.

Additional Information

Manufacturer: Zack Electronics
Part#:	TCC-75FF
Unit:	Each