Radio Design Labs TX-PD8X Switching Power Supply Distributor

Part No:
TX-PD8X
Unit of Measure: EACH
Ships from: Arizona
$161.07
List Price: $214.76
  
You save 25%
20 In stock
Is This The Right Item For Me?
800.466.0449

Features:

  • Distribution of 24 Vdc Power
  • Soft-Start from Switching Supply
  • Outputs may be Activated by an External Switch
  • Outputs may be Activated by an Open-Collector closure to ground
  • Directly Controllable by RDL Remote Controls
  • Up to 8 Power Distribution Points
  • Voltage Presence Indication
  • Reverse Voltage Protection
More Information
Brand Radio Design Labs
Manufacturer Radio Design Labs
SKU TX-PD8X
UPC 813721016300
Part No TX-PD8X
Weight (lb.) 1.1
Unit EACH
Carton Quantity 1
Short Description

Radio Design Labs TX-PD8X Switching Power Supply Distributor

The TX-PD8X is the ideal choice where power distribution from a current-limited switching power supply is needed. It is suitable for powering up to eight modules from a single power supply. The current limiting circuitry in many switching power supplies will cause the supply to shut down upon power-up when a high current capacitive load is connected. Upon application of power, the TX-PD8X ramps the voltage up, charging any load capacitance as quickly as possible, then switching full voltage to the load. If reverse polarity is connected to the input, the TX-PD8X disconnects the load until the condition is corrected.

In system design, various modules are frequently operated from a single power supply. Good engineering practice requires that the power wiring to each module originate at the power supply output. The TX-PD8X serves as the power source for each of eight modules. The TX-PD8X normally provides power to ground-referenced modules. A front-panel switch permits the installer to enable external control. When the ON terminal is connected to ground, the TX-PD8X outputs are active. External control is possible using RDL detection or control modules, open-collector outputs from OEM equipment or controllers, or using a D-RT2 RDL remote wall control. The front-panel blue LED remains illuminated when the outputs are active.

Description

Features:

  • Distribution of 24 Vdc Power
  • Soft-Start from Switching Supply
  • Outputs may be Activated by an External Switch
  • Outputs may be Activated by an Open-Collector closure to ground
  • Directly Controllable by RDL Remote Controls
  • Up to 8 Power Distribution Points
  • Voltage Presence Indication
  • Reverse Voltage Protection

Zack Electronics Large Quantity Quote Request

The Zack Electronics Quick Quote system will notify us of your interest in purchasing a large quantity of this item:

Write Your Own Review
How do you rate this product?

Write your own Review