Lowell Speaker-8in Coax, 20oz Magnet, 50W, 8ohm , 32W 70V xfmr (made to order) (8A50-TS3270 )

50-Watt 8in Coaxial Compression Driver Speaker, 20oz Magnet, 70V, 32W Transformer This 8 in. 50W coaxial driver is the flagship of our A-Series with greater power handling, lower distortion, and smoother musical sound than standard commercial drivers. Ideal for venues where the listening experience is a key part of customer satisfaction. 8 in. 50W coaxial with 20 oz. LF magnet coupled with 1.4 in. copper voice coil drive a polypropylene cone with half-roll rubber surround for long cone travel and good edge damping. Post-mounted tweeter (1 in. balanced-drive dome) protected by Ferrofluid and first-order high-pass filter. Features 20 oz. LF magnet coupled with 1.4" copper voice coil drive a polyproylene cone with half-roll rubber surround for long cone travel and good edge damping. Post-mounted tweeter is a 1" balanced-drive dome protected by Ferrofluid and a first-order high-pass filter. Frequency response is 40Hz-20kHz+6dB with a crossover at 4 kHz. Loudspeaker's capacity to deliver a wide angle of sound distribution (110-degrees) over a large area with uniform re- sponse and voice clarity ensures complete coverage with min imum units. Speaker frame is stamped 20-ga. steel with black enamel finish and zinc plated backplate. Meets or exceeds all applicable EIA standards. Available with factory-wired transformer (8W, 16W or 32W) or in a shallow depth. Models with a transformer include a bracket mounted to top of magnet for secure support. Specifications Frame: 20-gauge stamped steel with black enamel finish, zinc-plated back-plate. Mounting Bolt Circle: 7.625 in. Transformer: 70V with taps at 8, 16, 32W Assembly Frequency Response: 40Hz-17.5kHz (±6dB) and 40Hz-20kHz (±9.6dB) Assembly Mounting Depth: 7.80 in. Assembly Dispersion Angle: 90 degrees conical Assembly Average Sensitivity: 91.1dB COMPLIANCE & CERTIFICATION Made in U.S.A. with global components Meets or exceeds industry standards