<p>ETS PV907 S-Video without Audio to RJ45</p>
<p>S-Video without Audio to RJ45 from Computer Cable Store™. The ETS PV902 S-Video/Stereo Audio Balun adapts Category 5 or better premise wiring for use with Super VHS, Hi-8 and other "Y/C" format, high quality video signals. The PV907 uses the industry standard 4 pin-mini-DIN connector for video, and RCA jacks for the two audio channels. This arrangement compliments the connectors on most high-end consumer and Y/C formation professional video devices.<br /><br />The PV907 is a passive (non-powered) device. It is bi-directional, in the sense that identical baluns are used on transmit and receive ends of the run of UTP. Used in pairs to adapt both end of a run of Category 5 or better cable, the result is clean, transparent video and audio transmitted over distances in excess of 300 meters.</p>
<ul>
<li>S-Video (Y/C baseband) channel and 2 audio channels on one run of UTP</li>
<li>Use for point to point replacement of coax and shielded cables</li>
<li>Rugged plastic cases</li>
<li>Made in USA. 100% QA.</li>
<li>Home Theater</li>
<li>High Resolution Remote Monitors</li>
<li>"Prosumer" Video Equipment</li>
<li>Video Projection Systems</li>
<li>Flat to 60 MHz (video) / 10 Hz to 20kHz (audio)</li>
<li>4 pin minidin (video) / (2) RCA (audio) to RJ45</li>
<li>>50dB (video)</li>
<li>600:600 (audio)</li>
<li>500 V (audio, per channel)</li>
<li>66mm x 66mm x 28mm</li>
</ul>
<p><span><br /></span></p>
S-Video without Audio to RJ45 from Computer Cable Store™. The ETS PV902 S-Video/Stereo Audio Balun adapts Category 5 or better premise wiring for use with Super VHS, Hi-8 and other "Y/C" format, high quality video signals. The PV907 uses the industry standard 4 pin-mini-DIN connector for video, and RCA jacks for the two audio channels. This arrangement compliments the connectors on most high-end consumer and Y/C formation professional video devices.
The PV907 is a passive (non-powered) device. It is bi-directional, in the sense that identical baluns are used on transmit and receive ends of the run of UTP. Used in pairs to adapt both end of a run of Category 5 or better cable, the result is clean, transparent video and audio transmitted over distances in excess of 300 meters.
S-Video (Y/C baseband) channel and 2 audio channels on one run of UTP
Use for point to point replacement of coax and shielded cables