RDL 2 Channel Remote Control for STICK-ONs (D-RC2ST)

Part No:
D-RC2ST
Ships from: Arizona
$120.20
List Price: $176.09
  
You save 32%
10 In stock
Is This The Right Item For Me?
800.466.0449
The front panel of the D-RC2ST features two pushbuttons with two associated LEDs. Upon initial power-up, source 1 is selected. Touching the other button de-selects source 1 and immediately selects source 2. An LED adjacent to each button shows which source is selected. In a typical installation, the D-RC2ST may be used to select between two audio or video sources, or to route audio to two destinations. To select between two audio sources, the D-RC2ST is connected to an RDL ST-SSR1 Solid-State Audio Switch. For video switching, an RDL TX-MVX may be used. For audio routing, an RDL ST-RX2 is used. In each of the above examples, only one output terminal is needed for triggering. Therefore a single shielded pair (or 3-conductor cable) is required for remote connection. For more complex switching networks, both outputs may be used.
More Information
Brand Radio Design Labs
Manufacturer Radio Design Labs
SKU D-RC2ST
UPC 641125223563
Part No D-RC2ST
Weight (lb.) 0.35
Product Datasheet http://www.rdlnet.com/downloads/datasheets/db-rc2st.pdf
Short Description Features: Remote Selection of 2 Audio Sources, Destinations or Functions Single-Button Selection for Each Source Open-collector Switching of 1 of 2 Module Functions 3-wire or 4-wire Remote Wiring Professional Aesthetic Appearance Companion to other RDL® Remote Controls
Description The front panel of the D-RC2ST features two pushbuttons with two associated LEDs. Upon initial power-up, source 1 is selected. Touching the other button de-selects source 1 and immediately selects source 2. An LED adjacent to each button shows which source is selected. In a typical installation, the D-RC2ST may be used to select between two audio or video sources, or to route audio to two destinations. To select between two audio sources, the D-RC2ST is connected to an RDL ST-SSR1 Solid-State Audio Switch. For video switching, an RDL TX-MVX may be used. For audio routing, an RDL ST-RX2 is used. In each of the above examples, only one output terminal is needed for triggering. Therefore a single shielded pair (or 3-conductor cable) is required for remote connection. For more complex switching networks, both outputs may be used.

Zack Electronics Large Quantity Quote Request

The Zack Electronics Quick Quote system will notify us of your interest in purchasing a large quantity of this item:

Write Your Own Review
How do you rate this product?

Write your own Review